E-Vision Laser 15000 WU

15,000 ISO / 13,500 ANSI Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 120-995

Key Specifications:

Colour System:

Blue and Red Lasers with Phosphor wheel

Display Type:

1 x 0.67" DarkChip™ DMD™

DMD Specification:

1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.

Aspect Ratio:

16x10

Fill Factor

Key Features:

Red Laser Assist

Uses blue and red laser diodes for increased colour fidelity and highly accurate colours

Video & Graphics Processing

HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
Triple Flash processing for 24Hz 3D input (Frame Packed and Dual Pipe 3D)
Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
Synchronisation of active glasses.
3GSDI with loop-through.
24p and 1080p native display.
DICOM simulation mode.

Geometry Correction

Four Corners, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.
Non Linear Warp.
Blanking control for custom input window sizing.
Digital zoom, pan and scan.
Scaling available for fixed aspect ratio screens and independent input aspect ratios.

Edge Blending

For independent edge and blend width adjustment.
Correction for non-active pixels at the edge of the display.
Electronic black level compensation.

Picture in Picture

Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.

HDBaseT® Interface

Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows the projector to be placed up to 100m from the source with low cost cabling.

Colour Processing

Powerful seven point colour correction for accurate colour matching.
Selectable default colour gamut

Projector Control

Intuitive user interface for network control

PC Projector Controller Application for:

Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status
Served web pages for browser monitoring and control access from PC's and Smart phones

Projector Automation

Real-time clock provides daily on/off automation.

Projector Maintenance Features

IP6x Sealed optics.
Long life 20,000 hour illumination.

Source Compatibility

3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
Component Video (SD and HD) via RGBHV.

Inputs/Outputs

Video & Computer
Type	Connector	Qty
DVI-D 1.0 DisplayPort 1.1a HDMI 1.4b 3G-SDI in 3G-SDI out VGA / Analog RGB VGA Monitor out Component Video HDBaseT (see LAN)	DVI DisplayPort HDMI BNC BNC 15-pin D-Sub 15-pin D-Sub 5 x BNC LAN RJ45	1 1 2 1 1 1 1 1 1

Communication & Control
Type	Connector	Qty
3D Sync Out 3D Sync In LAN RS232 Wired Remote 12V Trigger USB Power 5V/2A NOTE: The LAN port is shared with HDBase-T. NOTE: USB Power only for WHDI interfaces.	BNC BNC RJ45 9-pin D-Sub 3.5mm Stereo Jack 3.5mm Stereo Jack USB Type A	1 1 1 1 1 2 1

3D Formats Supported

Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom

HDTV Formats Supported

1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)

Computer Compatibility

Up to 2560 x 1600 RB displayed within WUXGA

Bandwidth

165 MHz on analog RGB
165 Megapixels per second on HDMI

Remote Control

Addressable IR remote control, wireless and wired.
On-Board keypad.

Automation Control

PJLink Class 1
LAN
RS-232
AMX (Device Discovery)
Served web page
Crestron Connected
ART-NET control

Colour Temperature

3200 to 9300K

Operation

illumination Type

Blue and Red Laser Light Source

Typical illumination Life

20,000 hours

Lenses

Lens	Part No.	Optimised Focus Range*	Lens Shift (Frame)
0.38 :1 fixed	117-341	0.68m - 2.44m	Depends on image size, see Installation Guide.
0.75 - 0.93 :1 zoom	115-339	1.02m - 12.7m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
0.76 :1 fixed	112-499	0.81m - 5.08m	none
1.25 - 1.79 :1 zoom	112-500	1.33m - 11.73m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.73 - 2.27 :1 zoom	112-501	1.83m - 14.9m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.22 - 3.67 :1 zoom	112-502	2.36m - 24.2m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.58 - 5.38 :1 zoom	112-503	3.8m - 35.35m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.31 - 8.26 :1 zoom	112-504	5.59m - 54.8m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).

Mechanical Mounting

Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet

Orientation

Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes

Power Requirements

200-240VAC 50/60Hz single phase 8.2A
100-130VAC 50/60Hz single phase 11.9A
Note: that in 100-130VAC operation, the projector will be at 65% brightness

Power Consumption

Typical 1570W @ 240VAC in Normal mode
Typical 1025W @ 110VAC in Normal mode

Thermal Dissipation

Typical 5357 BTU/Hour @ 240VAC in Normal mode
Typical 3497 BTU/Hour @ 110VAC in Normal mode

Fan Noise

Normal mode: 48 dBA Max, 46 dBA Typical
Eco mode: 45 dBA Max, 43 dBA Typical

Operating/Storage Temperature Operating:

Operating: 0 to 35C (32 to 95F)
Operating: 35 to 40C (95 to 104F) w/ reduced light output
Storage: -20 to 60C (-4 to 140F)

Operating Humidity

10 to 90% relative, non-condensing

Weight

29.5 kg / 65 lbs

Dimensions

L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in

Safety & EMC Regulations

UL / cUL, BIS, CB, CCC, KC, FCC (Part 15) Class A, FDA, CE, RoHS 2, IEC EN 60825-1-2014 Class 3R Laser Product, IEC EN 60825-1-2007 Class 1 Laser Product IEC EN 62471-5-2015 Risk Group 3

Accessories

Accessory	Part No.
Infrared Remote (replacement) Lens Hood (Required in the USA for FDA Compliance with lenses 112-503 & 112-504)	117-880 121-867

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

User Guide

Laser Risk Group Document

Important Information

Important Information (German)