Click to Print This Page

logo
logo

 

E-Vision 12000i 4K+ (duplicate with 12016. please see 12016)

12,000 ISO / 10,800 ANSI Lumens | Contrast Ratio: 20,000:1 (Dynamic Black) | Part Number: 124-459


Key Specifications:

Colour System: Laser Phosphor with Colorboost (Red Laser).
Phosphor wheel: 2 x 7200rpm (120Hz)
Colour wheel: 8 Segment RGBYRGBY 2 x 7200rpm (120Hz)
Display Type: 1 x 0.8" HEP DMD™ (High Efficency Pixel)
DMD Specification: 1920 x 1200 pixels native display. (3840 x 2400 via 4-way pixel shift technology)
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • Nexus electronics platform
  • Support 3840 x 2160 display resolution
  • HDMI 2.0
  • DisplayPort 1.2
  • 10-bit colour processing (30-bits per pixel) 1,073,741,824 colours
  • Hue, Saturation and Gain colour management.
  • 24p and 1080p native display.
  • HDR support
  • Input source automaticaly detected
  • Selectable Dynamic Black
  • DICOM simulation mode
  • Optics engine sealed to IP6X
Geometry Correction
  • Vertical & Horizontal Keystone correction
  • Four Corner adjustment
  • Rotation -100 to +100 with +/- 0.25° per step
  • Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled
  • Digital Zoom 0% ~ 100%
  • Blanking control for custom input window sizing.
  • Scaling for fixed aspect ratio screens.16:10 / 16:9 / 4:3 / 2.35:1
  • Custom warp
Edge Blending
  • Correction for non-active pixels at the edge of the display.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100m from the source with low cost cabling.
  • HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • Powerful seven point colour correction for accurate colour matching.
Projector LAN Control
  • Free Digital Projection Projector Controller II software
  • Intuitive user interface for network control.
  • At-a-glance monitoring of projector status.
  • Simultaneous control of user-defined groups of projectors.
Source Compatibility 12G-SDI, Supports a high data transfer rate of up to 12 gigabits per second (Gbps), enabling the transmission of uncompressed 4K UHD (Ultra High Definition) video signals with a single connector

Graphics standards up to WUXGA 1920 x 1200 - 120Hz RB, Up to WQXGA 2560 x 1600 60Hz RB (DisplayPort)

Video standards including HDTV 1080p - 60Hz and 4K+ (3840 x 2400) 60Hz

Support for colour gamuts up to P3
Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 2.0b
Display Port 1.2
12G SDI IN
12G SDI OUT
HDBaseT
HDMI
DisplayPort
BNC
BNC
8P8C "RJ45"
x 2
x 2
x 1
x 1
x 1
.
Communication & Control
Type Connector Qty
3D Sync In
3D Sync Out (loop through)
3D Sync Out for IR
LAN / Art-Net
HDBaseT/Ethernet/RS232/IR
Serial In RS-232C
Serial Out RS-232C
Wired Remote In
Wired Remote Out
12V Trigger 12V 350mA
USB Power out 5V/2A
BNC
BNC
BNC
EtherCON RJ45
RJ45
9-pin D-Sub
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
1
1
1
1
1
1
1
1
1
1
1
3D Formats Supported Off
Auto
Side by Side
Top and Bottom
Dual Pipe
Frame Sequential
HDTV Formats Supported EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), 4K-UHD (3840 x 2160), DCI 4K (4096 x 2160)
Computer Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA, WQXGA
Bandwidth
Remote Control Infrared/Wired Remote Control Unit
Automation Control LAN - Webpage control
TCP/UDP control
RS-232
Alert Mail for Projector
LAN Control-Crestron® Connected
LAN Control-PJ Link Class 1 compatible
LAN Control-AMX® Device Discovery
Art-Net (DMX) control
Colour Temperature User selectable (3200K/ 5400K / 6500K / 7500K / 9300K / Native )
Operation
illumination Type Laser Phosphor. ECO mode support (80% Brightness)
Typical illumination Life 20,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.31 - 0.33:1 zoom 124-318 0.38 - 3.01m Vert: +/- 50%
Hor: +/- 20%
0.55 - 0.75:1 zoom 124-319 0.69 - 6.58m Vert: +/- 50%
Hor: +/- 20%
0.74 - 1.08:1 zoom 124-320 0.75 - 12.19m Vert: +/- 50%
Hor: +/- 20%
1.05 - 1.41:1 zoom 124-321 1.06 - 18.94m Vert: +/- 60%
Hor: +/- 20%
1.4 - 2.11:1 zoom 124-322 1.47 - 27.86m Vert: +/- 60%
Hor: +/- 20%
2.1 - 4.0:1 zoom 124-323 2.24 - 54.19m Vert: +/- 60%
Hor: +/- 20%
3.0 - 4.52:1 zoom 112-503 2.53 - 47.2m Vert: +/- 45%
Hor: +/- 10%
4.46-6.94:1 zoom 112-504 3.71 - 76.7m Vert: +/- 45%
Hor: +/- 10%

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Centred lens for installation flexability
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Ceiling Mount compatible chassis with 6 off M4*0.7 mounting holes available, Maximum screw length 16mm
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption At 110VAC - Typical 720W, Max 770W in Normal mode
At 110VAC - Typical 650W, Max 680W in Eco mode
At 110VAC - Typical 590W, Max 640W in High Altitude Mode
At 220VAC - Typical 690W, Max 720W in Normal mode
At 220VAC - Typical 630W, Max 650W in Eco mode
At 220VAC - Typical 580W, Max 630W in High Altitude Mode
<0.5W in Super Eco mode, <3W in Normal mode, <25W in Normal Mode
Thermal Dissipation At 110VAC - Typical 2457 BTU/hr, Max 2628 BTU/hr in Normal mode
At 110VAC - Typical 2218 BTU/hr, Max 2321 BTU/hr in Eco mode
At 110VAC - Typical 2014 BTU/hr, Max 2184 BTU/hr in High Altitude Mode
At 220VAC - Typical 2355 BTU/hr, Max 2457 BTU/hr in Normal mode
At 220VAC - Typical 2150 BTU/hr, Max 2218 BTU/hr in Eco mode
At 220VAC - Typical 1980 BTU/hr, Max 2150 BTU/hr in High Altitude Mode
Fan Noise Normal mode: 40 dBA typical
Eco Mode: Max 39 dBA
Operating/Storage Temperature: Operating: 0 to 40 °C (32 to 104 °F)
Force ECO over 35°C (95°°F)
Operating Humidity 90% (with maximum temperature of 35°C (95°F)
Weight 29.4 kg / 64.8 lbs
Dimensions L: 598mm x W: 500mm x H:218mm
L: 23.54 inch x W: 19.68 inch x H: 8.58 inch
Safety & EMC Regulations cTUVus, CB report, CCC (China), Energy Conservation Certification (China), Ecolabeling (China), China RoHS, FCC part 15 Class A, CE (European Economic Area), UKCA (United Kingdom), KC (Korea), BSMI (Taiwan), RCM (Australia), IEC 60825-1 : 2014 - Class 1 Laser Product, IEC EN 62471-5:2015 - Risk Group 2

This projector may become Risk Group 3 when an interchangeable lens with a throw ratio of greater than 2.12:1 is installed. Such combinations of projector and lens are intended for professional use only and are not intended for consumer use.

Complies with 21 CFR part 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:2015 (See Laser Notice No.57, dated May 2019).

RG2 This projector employing RG2 lens complies with FDA performance standards for laser products except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5: Ed. 1.0 (See Laser Notice No. 57, dated May 8, 2019).

RG3 This projector employing RG3 lens complies with performance standards for laser product 21 CFR Paert 1040 except with respect to those characteristics authorized by Variance Number FDA-2024-V-0726 effective March 08, 2024.
Accessories
Accessory Part No.
Infrared Remote Control Unit
Remote control cable 5m (for use with RCU)
Batteries x2 AAA
HDMI cable 2m
Power cord (Type region dependent)
Important Information Booklet

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads
User Guide