Click to Print This Page

logo
logo

 

E-Vision 15000i 4K+ (Preliminary)

15,000 ISO / 13,500 ANSI Lumens | Contrast Ratio: 20,000:1 (Dynamic Black) | Part Number: 124-361


Key Specifications:

Colour System: Laser Phosphor with Colorboost (Red Laser).
Phosphor wheel: 2 x 7200rpm (120Hz)
Colour wheel: 8 Segment RGBYRGBY 2 x 7200rpm (120Hz)
Display Type: 1 x 0.8" HEP DMD™ (High Efficency Pixel)
DMD Specification: 1920 x 1200 pixels native display. (3840 x 2400 via 4-way pixel shift technology)
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • Nexus electronics platform
  • HDMI 2.0
  • DisplayPort 1.2
  • 10-bit colour processing (30-bits per pixel) 1,073,741,824 colours
  • Hue, Saturation and Gain colour management.
  • 24p and 1080p native display.
  • HDR support
  • Input source automaticaly detected
  • Selectable Dynamic Black
  • DICOM simulation mode
  • Optics engine sealed to IP6X
Geometry Correction
  • Vertical & Horizontal Keystone correction
  • Four Corner adjustment
  • Rotation -100 to +100 with +/- 0.25° per step
  • Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled
  • Digital Zoom 0% ~ 100%
  • Blanking control for custom input window sizing.
  • Scaling for fixed aspect ratio screens.16:10 / 16:9 / 4:3 / 2.35:1
  • Custom warp
Edge Blending
  • Correction for non-active pixels at the edge of the display.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100m from the source with low cost cabling.
  • HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • Powerful seven point colour correction for accurate colour matching.
Projector LAN Control
  • Free Digital Projection Projector Controller II software
  • Intuitive user interface for network control.
  • At-a-glance monitoring of projector status.
  • Simultaneous control of user-defined groups of projectors.
Source Compatibility 12G-SDI, Supports a high data transfer rate of up to 12 gigabits per second (Gbps), enabling the transmission of uncompressed 4K UHD (Ultra High Definition) video signals with a single connector

Graphics standards up to WUXGA 1920 x 1200 - 120Hz RB, Up to WQXGA 2560 x 1600 60Hz RB (DisplayPort)

Video standards including HDTV 1080p - 60Hz and 4K-UHD (3840 x 2160) 60Hz

Support for up colour gamut up to P3
Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 2.0 (HDCP compatible)
DisplayPort 1.2
HDBaseT
12G-SDI in
3G-SDI out
HDMI
DisplayPort
8P8C "RJ45"
BNC
BNC
2
2
1
1
1
.
Communication & Control
Type Connector Qty
3D Sync In
3D Sync Out (loop through)
3D Sync Out for IR
LAN / Art-Net
HDBaseT/Ethernet/RS232/IR
Serial In RS-232C
Serial Out RS-232C
Wired Remote In
Wired Remote Out
12V Trigger 12V.350mA
USB Power out 5V/2A
BNC
BNC
BNC
EtherCON RJ45
RJ45
9-pin D-Sub
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
1
1
1
1
1
1
1
1
1
1
1
3D Formats Supported Off
Auto
Side by Side
Top and Bottom
Dual Pipe
Frame Sequential
HDTV Formats Supported EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), 4K-UHD (3840 x 2160), DCI 4K (4096 x 2160)
Computer Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA, WQXGA
Bandwidth
Remote Control Infrared/Wired Remote Control Unit
Automation Control LAN - Webpage control
TCP/UDP control
RS-232
Alert Mail for Projector
LAN Control-Crestron® Connected
LAN Control-PJ Link Class 1 compatible
LAN Control-AMX® Device Discovery
Art-Net (DMX) control
Colour Temperature User selectable (3200K/ 5400K / 6500K / 7500K / 9300K / Native )
Operation
illumination Type Laser Phosphor. ECO mode support (80% Brightness)
Typical illumination Life 20,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.31 - 0.33 :1 UST zoom (90° Type) 124-318 TBD Vert: 0.5 (U) 0.5 (D) frame, Hor: None (L) None (R) frame
0.55 - 0.75 :1 zoom 124-319 2.03m - 7.62m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
0.74 - 1.08 :1 zoom 124-320 1.52m - 10.16m (mech 1.27m - 12.7m) Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.05 - 1.41 :1 zoom 124-321 1.52m - 12.7m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
1.4 - 2.11 :1 zoom 124-322 1.52m - 12.7m (mech 1.27m - 15.24m) Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
2.1 - 4.0 :1 zoom 124-323 1.52m - 12.7m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
3.0 - 4.52 :1 zoom 112-503 TBD Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
4.46 - 6.94 :1 zoom 112-504 TBD Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.2 (L) 0.2 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Centred lens for installation flexability
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Ceiling Mount compatible chassis with 6 off M4*0.7 mounting holes available, Maximum screw length 16mm
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption 990W (max)
Thermal Dissipation TBD
Fan Noise Normal mode: 40 dBA typical
Eco Mode: Max 39 dBA
Operating/Storage Temperature: Operating: 0 to 40 °C (32 to 104 °F)
Force ECO over 35°C (95°°F)
Operating Humidity 90% (with maximum temperature of 35°C (95°F)
Weight 29.4 kg / 64.8 lbs
Dimensions L: 598mm x W: 500mm x H:218mm
L: 23.54 inch x W: 19.68 inch x H: 8.58 inch
Safety & EMC Regulations TBD
Accessories
Accessory Part No.

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

User Guide