Click to Print This Page

logo
logo

 

HIGHlite 10000 1080p (Preliminary)

10,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 114-346


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 0.65" DarkChip™ DMD™
DMD Specification: 1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x9
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • 24p and 1080p native display.

ColorMax™
  • User Selection and storage of Primary and Secondary color targets.
Projector Controller Software
  • Intuitive user interface for network control
  • Simultaneous control of user-defined groups of projectors
  • At-a-glance monitoring of projector status
Source Compatibility HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI input is HDMI compatible.
Graphics standards up to 1920 x 1080 at 60Hz via DVI.
Inputs/Outputs
Video & Computer
Type Connector Qty
DVI-D / DVI-A DVI-I 1
.
Communication & Control
Type Connector Qty
LAN
RS232
Wired Remote In
Wired Remote Out
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
1
1
1
1
3D Formats Supported Not applicable
HDTV Formats Supported 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Up to 1920 x 1080
Bandwidth 165 Megapixels per second on HDMI and DVI
Remote Control Addressable IR remote control, wireless and wired with loop-through.
On-Board keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 3200 to 9000K
Operation
illumination Type 2 x 370W High Intensity Discharge
Typical illumination Life Full Power: 1500 hours (up to 3000 hours in lamp sequential mode)
Eco Mode : 2000 hours (up to 4000 hours in lamp sequential mode)
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.77 : 1 fixed HB 110-808 1.3m - 15.0m Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
1.16 : 1 fixed HB 110-809 1.4m - 25.0m Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
1.45 - 1.74 : 1 zoom HB 110-803 1.8m - 9.3m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.74 - 2.17 : 1 zoom HB 112-878 2.2m - 11.8m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.17 - 2.90 : 1 zoom HB 113-852 2.7m - 15.4m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.90 - 4.34 : 1 zoom HB 110-806 3.6m - 22.5m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.34 - 6.76 : 1 zoom HB 110-807 5.5m - 35m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised shift, zoom and focus.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 90 - 240VAC 50/60Hz single phase
Power Consumption TBA
Thermal Dissipation TBA
Fan Noise TBA dBA
Operating/Storage Temperature: Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F)
Operating Humidity 20% to 90% non-condensing
Weight 27 kg / 60 lbs
Dimensions L: 66.5 cm W: 50 cm H: 22 cm
L: 26.2 in W: 19.7 in H: 8.7 in
Safety & EMC Regulations CE, FCC Class A & B, UL, CCC, KC
Accessories
Accessory Part No.
HIGHlite 10000 Lamp & Housing
RapidRig™ Frame
Swivel Truss Mount for rigging frame - fully adjustable for up to 150 kg
Infrared Remote (Replacement)
Ceiling Mount Kit w/plate & 500mm pole
Swivel Truss Mount Kit - fully adjustable for up to 50kg
TBA
111-265
115-926
105-023
112-942
116-201

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

User Guide