Click to Print This Page

logo
logo

 

iVision 20sx+ UW-XC

1,600 Lumens | Contrast Ratio: 2,500:1 | Part Number:


Key Specifications:

Colour System: 6 Segment RGBRGB Colour Wheel
Display Type: 1 x 0.95" DarkChip™ DMD™
DMD Specification: 1400 x 1050 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 4x3
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • Auto mode selection - plug and play setup
  • 10-bit color resolution
  • HDMI 1.3a and dual link DVI digital inputs
  • Full 10-bit deinterlacer with integral scaler

ColorMax™
  • User Selection and storage of Primary and Secondary colour targets.
Source Compatibility HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via DVI, HDMI or VGA.
DVI single link with HDCP compliance.
Component Video (SD and HD) via YPbPr.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
Inputs/Outputs
Video & Computer
Type Connector Qty
DVI-D - Single Link DVI
HDMI 1.3
VGA / Analog RGB
Component Video
S-Video
Composite Video
DVI
HDMI
15-pin D-Sub
YPbPr
4-pin Mini DIN
RCA
1
1
1
1
1
1
.
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Service Port
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type B
1
1
1
1
1
1
1
3D Formats Supported Not applicable
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility Up to 1920 x 1200
Bandwidth 205 MHz on analog RGB
160 MHz on DVI
75 MHz on Component
Remote Control Addressable IR remote control, wireless and wired with loop-through.
On-Board keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 3200 to 9300K
Operation
illumination Type 1 x 220 watt UHP VIDI lamp
Typical illumination Life Full Power: 2000 hours

Eco Mode : 4000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
iVision 20sx+ UW XL 0.8:1 107-723V .7m - 5.0m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ UW XC 0.8:1 107-721V .7m - 5.0m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ UW XB 0.8:1 107-722V .7m - 5.0m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ W XC 1.0:1 107-720V 1m - 10m Vert: 0.3 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ W XL 1.0:1 107-719V 1m - 10m Vert: 0.3 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ W XB 1.0:1 107-718V 1m - 10m Vert: 0.3 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ XB 1.78 - 2.23:1 107-715V 1.5m - 10m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ XL 1.78 - 2.23:1 107-716V 1.5m - 10m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ XC 1.78 - 2.23:1 107-717V 1.5m - 10m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ L XB 2.7 - 4.10:1 108-697V 5m - 25 m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ L XL 2.7 - 4.10:1 108-698V 5m - 25 m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame
iVision 20sx+ L XC 2.7 - 4.10:1 108-699V 5m - 25 m Vert: 0.5 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Manual shift, zoom & focus.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        +/-20° from horizontal
Pointing Down:   +/-20° from horizontal
Roll (Portrait):      Yes
Power Requirements 100-240 VAC, 50/60Hz
Power Consumption 350
Thermal Dissipation 1200
Fan Noise 30dBA
Operating/Storage Temperature: Operating: 0° to 40° C at 0-1500m / 0° to 35° C at 1500-3000m

Storage: -20° - 60° C
Operating Humidity 20% to 80% RH
Weight 2.55 kg / 6 lbs
Dimensions L: 23.4 cm W: 27.8 cm H: 9.4 cm
L: 9.2 in W: 10.9 H: 3.7 in
Safety & EMC Regulations CE, FCC Class A and cCSAus
Accessories
Accessory Part No.
iVision 20 Adjustable Ceiling Mount
iVision 20 Infrared Remote (Replacement)
iVision 20 Series 24/7 Maintenance Kit
106-958
105-494
107-747

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

User Guide

User Guides

Control Protocol