| Colour System: |
6 Segment RGBCMY Colour Wheel |
| Display Type: |
1 x 0.95" DarkChip™ DMD™
|
| DMD Specification: |
1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast. |
| Aspect Ratio: |
16x10 |
| Fill Factor |
|
| Key Features: |
Video & Graphics Processing
- Auto mode selection - plug and play setup
- 10-bit color resolution
- HDMI 1.3a and dual link DVI digital inputs
- Full 10-bit deinterlacer with integral scaler
ColorMax™
- User Selection and storage of Primary and Secondary colour targets.
|
| Source Compatibility |
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via DVI, HDMI or VGA.
DVI single link with HDCP compliance.
Component Video (SD and HD) via YPbPr.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM) |
| Inputs/Outputs |
| Video & Computer |
| Type |
Connector |
Qty |
DVI-D - Single Link DVI
HDMI 1.3
VGA / Analog RGB
Component Video
S-Video
Composite Video |
DVI
HDMI
15-pin D-Sub
YPbPr
4-pin Mini DIN
RCA |
1
1
1
1
1
1 |
.
| Communication & Control |
| Type |
Connector |
Qty |
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Service Port |
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type B |
1
1
1
1
1
1
1 |
|
| 3D Formats Supported |
Not applicable |
| HDTV Formats Supported |
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz) |
| Computer Compatibility |
Up to 1920 x 1200 |
| Bandwidth |
205 MHz on analog RGB
160 MHz on DVI
75 MHz on Component |
| Remote Control |
Addressable IR remote control, wireless and wired with loop-through.
On-Board keypad |
| Automation Control |
RS232
LAN |
| Colour Temperature |
User selectable from 3200 to 9300K |
| Operation |
 |
| illumination Type |
1 x 220 watt UHP VIDI lamp |
| Typical illumination Life |
Full Power: 2000 hours
Eco Mode : 4000 hours |
| Lenses |
| Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
| iVision 20-WUXGA XB 1.6 - 2.21:1 |
109-738V |
1.5m - 10m |
Vert: 0.54 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame |
| iVision 20-WUXGA XC 1.6 - 2.21:1 |
109-737V |
1.5m - 10m |
Vert: 0.54 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame |
| iVision 20-WUXGA XL 1.6 - 2.21:1 |
109-739V |
1.5m - 10m |
Vert: 0.54 (U) 0 (D) frame, Hor: 0 (L) 0 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
| Lens Mount |
Manual shift, zoom & focus.
|
| Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet |
| Orientation |
Table Top or Inverted: Yes
Pointing Up: +/-20° from horizontal
Pointing Down: +/-20° from horizontal
Roll (Portrait): Yes |
| Power Requirements |
100-240 VAC, 50/60Hz |
| Power Consumption |
350 |
| Thermal Dissipation |
1200 |
| Fan Noise |
30dBA |
| Operating/Storage Temperature: |
Operating: 0° to 40° C at 0-1500m / 0° to 35° C at 1500-3000m
Storage: -20° - 60° C |
| Operating Humidity |
20% to 80% RH |
| Weight |
2.55 kg / 6 lbs |
| Dimensions |
L: 23.4 cm W: 27.8 cm H: 9.4 cm
L: 9.2 in W: 10.9 H: 3.7 in |
| Safety & EMC Regulations |
CE, FCC Class A and cCSAus |
| Accessories |
| Accessory |
Part No. |
iVision 20 Adjustable Ceiling Mount
iVision 20 Infrared Remote (Replacement)
iVision 20 Series 24/7 Maintenance Kit |
106-958
105-494
107-747 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
| Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
|
| User Guide |
User Guides
Control Protocol
|