| Colour System: |
6 Segment RGBCWY Colour Wheel |
| Display Type: |
1 x 0.95" DarkChip™ DMD™
|
| DMD Specification: |
1400 x 1050 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast. |
| Aspect Ratio: |
4x3 |
| Fill Factor |
87% |
| Key Features: |
Video & Graphics Processing
- Auto mode selection - plug and play setup
- 10-bit color resolution
- HDMI 1.3a and dual link DVI digital inputs
- Full 10-bit deinterlacer with integral scaler
ColorMax™
- User Selection and storage of Primary and Secondary colour targets.
|
| Source Compatibility |
HDTV
NTSC
PAL
SECAM |
| Inputs/Outputs |
| Video & Computer |
| Type |
Connector |
Qty |
DVI-D - Single Link DVI
HDMI 1.3
VGA / Analog RGB
Component Video
S-Video
Composite Video |
DVI
HDMI
15-pin D-Sub
YPbPr
4-pin Mini DIN
RCA |
1
1
1
1
1
1 |
.
| Communication & Control |
| Type |
Connector |
Qty |
LAN
RS232
Service Port
Wired Remote In
Wired Remote Out
12V Trigger |
RJ45
9-pin D Sub
USB Type B
3.5mm Stereo Jack
3.5mm Stereo Jack
3.5mm Stereo Jack |
1
2
1
1
1
2 |
|
| 3D Formats Supported |
Not applicable |
| HDTV Formats Supported |
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz) |
| Computer Compatibility |
Up to 1920 x 1200 |
| Bandwidth |
205 MHz on analog RGB
160 MHz on DVI
75 MHz on Component |
| Remote Control |
Addressable IR remote control, wireless and wired with loop-through.
On-Board keypad |
| Automation Control |
RS232
LAN |
| Colour Temperature |
User selectable from 3200 to 9300K |
| Operation |
 |
| illumination Type |
1 x 300 watt UHP VIDI lamp or
1 x 300 watt UHP lamp |
| Typical illumination Life |
Full Power: 2000 hours Non-Vidi: 1700
Eco Mode : 2500 hours Non-Vidi: 2200 |
| Lenses |
| Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
| iVision 30sx+ XB 1.75 - 2.25:1 |
107-724V |
1m - 15m |
N/A |
| iVision 30sx+ XL 1.75 - 2.25:1 |
107-725V |
1m - 15m |
N/A |
| iVision 30sx+ XC 1.75 - 2.25:1 |
107-726V |
1m - 15m |
N/A |
| iVision 30sx+ W XB 1.0:1 fixed |
107-727V |
1.5m - 20m |
N/A |
| iVision 30sx+ W XL 1.0:1 fixed |
107-728V |
1.5m - 20m |
N/A |
| iVision 30sx+ W XC 1.0:1 fixed |
107-729V |
1.5m - 20m |
N/A |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
| Lens Mount |
Fixed Offset |
| Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet |
| Orientation |
Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): +/-20° from horizontal |
| Power Requirements |
90-260 VAC, 50/60Hz |
| Power Consumption |
350 |
| Thermal Dissipation |
1700 |
| Fan Noise |
28dBA |
| Operating/Storage Temperature: |
Operating: 10° to 40° C
Storage: -20° - 60° C |
| Operating Humidity |
20% to 80% RH |
| Weight |
3.4 kg / 7.5 lbs |
| Dimensions |
L: 27.8 cm W: 29.94 cm H: 11 cm
L: 10.9 in W: 11.8 H: 4.4 in |
| Safety & EMC Regulations |
CE, FCC Class A, UL, cUL and cCSAus |
| Accessories |
| Accessory |
Part No. |
iVision 30 Adjustable Ceiling Mount
iVision 30 Infrared Remote (Replacement)
iVision 30 Series 24/7 Maintenance Kit |
102-543
104-142
104-142 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
| Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
|
| User Guide |
User Guides
Control Protocol
|