Click to Print This Page

logo
logo

 

M-Vision Cine 400 3D

5,500 Lumens | Contrast Ratio: 2,000:1 | Part Number: 112-818


Key Specifications:

Colour System: 6 Segment RGBYCW Colour Wheel
Display Type: 1 x 0.95" DarkChip™ DMD™
DMD Specification: 1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x9
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
  • Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.
  • Synchronisation of active glasses, DLP® Link™ glasses or polarising switcher.
  • High Bandwidth Digital & Analogue Receiver with 10 Bit A-D.
  • 24p and 1080p native display.
  • BrilliantColor™ for increased system brightness.
  • Adaptive Contrast with frame-by-frame content analysis.
  • The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
  • Image enhancement for MPEG, Mosquito noise & Colour Transients in composite sources.
Source Compatibility HDMI including Deep Color™ processing and 3D standards.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or VGA.
Component Video (SD and HD) via YPrPb and RGB.
Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 1.4
VGA / Analog RGB
Component Video
Component Video
HDMI
15-pin D-Sub
3 x RCA
3 x BNC
2
1
1
1
.
Communication & Control
Type Connector Qty
3D Sync Out
LAN
RS232
IR Input
12V Trigger
Service Port
VESA 3-pin
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
1
1
1
1
2
1
3D Formats Supported Frame Packing
Dual Pipe
Side By Side (half)
Top and Bottom
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility Up to 1920 x 1200
Bandwidth 200 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control IR Remote Control
On-Board keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 5500 to 9300K
Operation
illumination Type 1 x 400W High Intensity Discharge
Typical illumination Life Full Power: 1500 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.73 fixed 110-156 0.97m - 1.3m none
0.84 - 1.03 : 1 zoom 112-762 1.5m - 4m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.12 (L) 0.12 (R) frame
1.56 - 1.86 : 1 zoom 110-157 2m - 7m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.85 - 2.40 : 1 zoom 110-158 2.5m - 10m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.4 - 4.0 : 1 zoom 112-319 4m - 12m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Manual shift, zoom & focus.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        +/-12° from horizontal
Pointing Down:   +/-12° from horizontal
Roll (Portrait):      Yes - only with exhaust pointing upwards
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption 505
Thermal Dissipation 1723
Fan Noise 42 dBA
Operating/Storage Temperature: Operating: 10 to 40C (50 to 95F)
Storage: -20 to 60C (-4 to 140F)
Operating Humidity 20% to 85% non condensing
Weight 13 kg / 28.7 lbs
Dimensions L: 44cm W: 50.8cm H: 18.2cm
L: 17.3 in W: 20 in H: 7.2 in
Safety & EMC Regulations CE, FCC Class B, cTUVus, CCC
Accessories
Accessory Part No.
M-Vision Cine 400 3D Lamp & Housing
Infrared Remote (replacement)
111-150
109-685

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

User Guide

User Guides

Important Information