Click to Print This Page

logo
logo

 

Titan LED + IR 1080p

2,000* Lumens | Contrast Ratio: 2,000:1 | Part Number: 114-468


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 0.95" DarkChip™ DMD™
DMD Specification: 1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x9
Fill Factor 87%
Key Features:
  • Digital Projection has developed a variant of its Titan projector that incorporates the latest LED illumination technology to provide amazing quality images.
  • These LEDs remain stable and consistent over many years of use, providing a colour gamut that goes way beyond the requirements of HDTV or cinema.
  • The stability of the colour and luminance is of particular value in multi-projector installations. The very high frame rate, low latency capabilities are perfectly suited to simulation.
  • Coupled with Digital Projection's advanced video processing technology, the new light sources provide the ideal reference quality display for home theatre, post production, visualisation and simulation installations.
  • *Takes into account Helmholtz-Kohlrausch effect. LED illuminated projectors produce extraordinarily high colour purity and saturation, thus appearing brighter than a lamp-based display with similar measured lumen specifications.

High Bandwidth Inputs with Minimal Latency

  • Pixel mapped to the display.
  • Simultaneous display of visible and infrared light.
  • Fully independant RGB & IR dimming.
  • FastFrame™ Smear Reduction.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User selection and storage of primary and secondary color targets.
Projector Controller
  • Provides an intuitive user interface for network control.
  • Send commands simultaneously to user-defined groups.
  • At a glance monitoring of projector status.
Source Compatibility DVI includes Deep Color™ processing up to 36 bit.
DVI input is HDMI compatible.
Inputs/Outputs
Video & Computer
Type Connector Qty
DVI-D / DVI-A DVI-I 1
.
Communication & Control
Type Connector Qty
LAN
RS232
Wired Remote In
Wired Remote Out
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
1
1
1
1
3D Formats Supported Not applicable.
HDTV Formats Supported 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz)
Computer Compatibility Up to 1920 x 1080
Bandwidth 165 Megapixels per second on DVI
Remote Control Addressable IR remote control, wireless and wired with loop-through.
On-Board invertable keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 3200 to 9000K
Operation
illumination Type LED Illumination Module
Typical illumination Life 60,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.67:1 fixed HB 105-607 1.1m - 10m Vert: 0.176 (U) 0.176 (D) frame, Hor: 0.063 (L) 0.063 (R) frame
1.12:1 fixed HB 105-608 3m - 15m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.12:1 (short) fixed HB 105-609 1.2m - 2m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.16 - 1.49:1 zoom HB 109-236 3m - 15m Vert: 0.509 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.39 - 1.87:1 zoom HB 105-610 4m - 24m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.87 - 2.56:1 zoom HB 105-611 4m - 24m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
2.56 - 4.16:1 zoom HB 105-612 9.1m - 45m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
4.16 - 6.96:1 zoom HB 105-613 12m - 80m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
6.92 - 10.36:1 zoom HB 109-235 12m - 80m Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised and programmable shift, zoom and focus. Intelligent Lens Memory with 5 user-definable preset positions.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Rugged, staging tolerant chassis with integrated handles.
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption 400
Thermal Dissipation 1365
Fan Noise TBD
Operating/Storage Temperature: Operating: 0 to 35C (32 to 95F)
Storage: -10 to 50C (14 to 122F)
Operating Humidity 20 to 80% non-condensing
Weight 36 kg / 79.4 lbs
Dimensions L: 72 cm (approx) W: 51 cm (approx) H: 23 cm (approx)
L: 28.3 in (approx) W: 20 in (approx) H: 9.1 in (approx)
Safety & EMC Regulations CE, FCC Class A, CCC
Accessories
Accessory Part No.
RapidRig™ Frame
Infrared Remote (Replacement)
111-265
105-023

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

Lens CAD Drawings

User Guide