Click to Print This Page

logo
logo

 

HIGHlite 730 WUXGA (Preliminary)

9,000 Lumens | Contrast Ratio: 2,000:1 | Part Number:


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 0.67" DarkChip™ DMD™
DMD Specification: 1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor
Key Features:
Video & Graphics Processing
  • High Bandwidth Digital & Analogue Receiver with 10 Bit A-D.
  • The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
  • Displayed image frame locked to input with as low as 1 frame total latency.
  • 24p and 1080p native display.
  • Image enhancement for MPEG, Mosquito noise & Colour Transients in composite sources.
Geometry Correction
  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
  • Non-Linear Warp adjustment by moving points on an interpolated grid.
Edge Blending
  • Semi-automated Multi Projector Tiling
  • Correction for non-active pixels at the edge of the display.
Super Image Clarity
  • Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution.
Picture in Picture
  • Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User Selection and storage of Primary and Secondary colour targets.
Projector Controller Software
  • Intuitive user interface for network control
  • Simultaneous control of user-defined groups of projectors
  • At-a-glance monitoring of projector status
Source Compatibility 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD & HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
Inputs/Outputs
Video & Computer
Type Connector Qty
DVI-D / DVI-A
HDMI 1.3
3G-SDI
VGA / Analog RGB
Component Video
S-Video
Composite Video
Composite Video

Audio
SPDIF Digital Output
DVI-I
HDMI
BNC
15-pin D-Sub
4 x BNC
4-pin Mini DIN
RCA
BNC


RCA
1
1
1
1
1
1
1
1


1
.
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Service Port
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type B
1
1
1
1
1
1
1
3D Formats Supported Not applicable
HDTV Formats Supported 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Up to 1920 x 1200
Bandwidth 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
Remote Control Addressable IR remote control, wireless and wired with loop-through.
On-Board keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 3200 to 9000K
Operation
illumination Type 2 x 370W High Intensity Discharge
Typical illumination Life Full Power: 1500 hours (up to 3000 hours in lamp sequential mode)
Eco Mode : 2000 hours (up to 4000 hours in lamp sequential mode)
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.77 : 1 fixed HB 110-808 1.3m - 15.0m Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
1.16 : 1 fixed HB 110-809 1.4m - 25.0m Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame
1.45 - 1.74 : 1 zoom HB 110-803 1.8m - 9.3m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.74 - 2.17 : 1 zoom HB 112-878 2.2m - 11.8m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.17 - 2.90 : 1 zoom HB 113-852 2.7m - 15.4m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.90 - 4.34 : 1 zoom HB 110-806 3.6m - 22.5m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.34 - 6.76 : 1 zoom HB 110-807 5.5m - 35m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised shift, zoom and focus.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 90 - 240VAC 50/60Hz single phase
Power Consumption 950
Thermal Dissipation 3241
Fan Noise 39dBA
Operating/Storage Temperature: Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F)
Operating Humidity 20% to 90% non-condensing
Weight 27 kg / 60 lbs
Dimensions L: 66.5 cm W: 50 cm H: 22 cm
L: 26.2 in W: 19.7 in H: 8.7 in
Safety & EMC Regulations CE, FCC Class A & B, UL, CCC, KC
Accessories
Accessory Part No.
HIGHlite 730 Lamp & Housing
RapidRig™ Frame
Swivel Truss Mount for rigging frame - fully adjustable for up to 150 kg
Infrared Remote (Replacement)
Ceiling Mount Kit w/plate & 500mm pole
Swivel Truss Mount Kit - fully adjustable for up to 50kg
114-303
111-265
115-926
105-023
112-942
116-201

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

User Guide

User Guides

Important Information

Control Protocol