Click to Print This Page

logo
logo

 

iVision 50 1080p XL

5,500 Lumens | Contrast Ratio: 5,300:1 | Part Number:


Key Specifications:

Colour System: XL Color Wheel - Enhanced Luminance - Better for Ambient Light Venues
Display Type: 1 x 0.95" DarkChip™ DMD™
DMD Specification: 1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x9
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom 3D Formats.
  • Dual Head 3D converts any two L/R single stream signals to one sequential 120Hz 3D stream.
  • Synchronisation of active glasses or polarising switcher.
  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
  • 24p and 1080p native display.
  • FastFrame™ Smear Reduction.
  • Frame lock sync for multi-channel applications.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User selection and storage of primary and secondary color targets.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows projector to be placed up to 100m from source with low cost cabling.
Source Compatibility HDMI including Deep Color™ processing and 3D standards.
Dual Link DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
Graphics standards up to 1920 x 1200 resolution at via DVI, HDMI or VGA.
Inputs/Outputs
Video & Computer
Type Connector Qty
DisplayPort 1.2
Dual Link DVI-D
HDMI 1.4
VGA
3GSDI
HDBaseT
DisplayPort
DVI-I
HDMI Type A
15-pin D-Sub
BNC
RJ45
2
1
1
1
2
1
.
Communication & Control
Type Connector Qty
LAN
RS232
Service Port
Sync
Sync
RJ45
9-pin D Sub
USB Type A
BNC
3-pin mini-DIN
1
1
1
2
1
3D Formats Supported Frame Packing
Frame Sequential
Side By Side (half)
Top and Bottom
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility Up to 1920 x 1200
Bandwidth 205 MHz on analog RGB
165 Megapixels per second on DVI and HDMI
297 Megapixels per second on Dual Link DVI
Remote Control IR remote control
On-Board keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 3200 to 9300K
Operation
illumination Type 1 x 350W UHP
Typical illumination Life Full Power: 2000 hours
Eco Mode : 2500 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.28 : 1 fixed 116-408 0.45m - TBD Vert: 0.535-0.6 (U) 0 (D) frame, Hor: 0.01 (L) 0.01 (R) frame
0.74 : 1 fixed 115-487 0.8m - 3.3m Vert: 0.295 (U) 0 (D) frame, Hor: 0.265 (L) 0.265 (R) frame
0.92 : 1 fixed 115-486 1m - 10m Vert: 0.46 (U) 0 (D) frame, Hor: 0.33 (L) 0.33 (R) frame
0.80 - 1.08 : 1 zoom 115-488 0.8m - 5m Vert: 0.52 (U) 0 (D) frame, Hor: 0.355 (L) 0.355 (R) frame
1.06 - 1.62 : 1 zoom 115-489 1.3m - 7m Vert: 0.52 (U) 0 (D) frame, Hor: 0.355 (L) 0.355 (R) frame
1.6 - 2.21 : 1 zoom 115-485 1.5m - 10m Vert: 0.58 (U) 0 (D) frame, Hor: 0.385 (L) 0.385 (R) frame
2.5 - 3.9 : 1 zoom 115-784 5m - 25m Vert: 0.575 (U) 0 (D) frame, Hor: 0.385 (L) 0.385 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorized shift. Manual zoom and focus.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      +/-20° from horizontal
Power Requirements 100-240 VAC, 50/60Hz
Power Consumption 530
Thermal Dissipation 1807
Fan Noise TBA
Operating/Storage Temperature: Operating: 10° to 40° C

Storage: -20° - 60° C
Operating Humidity 20% to 80% RH
Weight 7.5 kg / 16.5 lbs
Dimensions L: 30.6 cm W: 34.2 cm H: 14.3 cm
L: 12.05 in W: 13.46 H: 5.63 in
Safety & EMC Regulations CE, FCC Class A, UL, cUL and cCSAus
Accessories
Accessory Part No.

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

User Guide

User Guides