Click to Print This Page

logo
logo

 

Mercury Quad WUXGA

18,000 ANSI / 20,000 ISO Lumens | Contrast Ratio: 2,000:1 | Part Number: 117-779


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 0.96" DarkChip™ DMD™
DMD Specification: 1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor
Key Features:
Video & Graphics Processing
  • DisplayPort accepts frame rates up to 120 Hz.
  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom 3D formats.
  • Image enhancement for MPEG, Mosquito noise & color transients in composite sources.
  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
  • Dual Pipe Processing: two sources in parallel for left and right eyes via HDMI.
  • Synchronisation of active glasses or polarising switcher.
  • Blend and warp processing.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows projector to be placed up to 80m from source with low cost cabling.
Geometry Correction
  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc, and Image Rotation.
  • Blanking control for custom input window sizing.
  • Fit source aspect ratio to screen aspect ratio.
  • Non-linear warp for curved screens via Projector Controller application.
Edge Blending
  • Blending control of all sides with width control.
  • Electronic black level compensation.
  • Correction for non-active pixels at the edge of the display.
Picture in Picture
  • Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User selection and storage of primary and secondary color targets.
Projector Control
  • Infra-red and wired remote.
  • LAN control via protocol.
  • Network control via hosted web page.
  • Built-in ON/OFF timer for automatic start and switch off.
  • Password Lamp Control.
Projector Controller Software
  • Intuitive user interface for network control.
  • Simultaneous control of user-defined groups of projectors.
  • At-a-glance monitoring of projector status.
Source Compatibility HDMI including Deep Color™ processing and 3D standards.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI and 120 Hz via DisplayPort.
Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 1.4
DisplayPort 1.1a
HDBaseT/LAN
3G-SDI In
3G-SDI Out
HDMI
DisplayPort
RJ45
BNC
BNC
2
1
1
1
1
.
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN (see HDBaseT)
RS232
Wired Remote
12V Trigger


NOTE: The LAN port is shared with HDBase-T.
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
1
1
1
1
1
2
3D Formats Supported Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
HDTV Formats Supported 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Up to 1920 x 1200 60Hz (HDMI/HDBaseT)
Up to 1920 x 1200 120Hz (DisplayPort)
Bandwidth 165 Megapixels per second on HDMI and DisplayPort
295 Megapixels per second on DisplayPort
Remote Control IR remote control, wireless and wired.
On-Board keypad
Automation Control Crestron Room View® Connected
PJ Link
LAN
RS232
AMX (Device Discovery)
Colour Temperature User selectable from 3200 to 9000K
Operation
illumination Type 4 x 465W High Intensity Discharge
Typical illumination Life Full power: 2500 hours
Eco mode: 3000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.67:1 fixed HB 105-607 1.1m - 10m Vert: 0.108 (U) 0.108 (D) frame, Hor: 0.044 (L) 0.044 (R) frame
1.12:1 fixed HB 105-608 3m - 15m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.16 - 1.49:1 zoom HB 109-236 3m - 15m Vert: 0.408 (U) 0.408 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.39 - 1.87:1 zoom HB 105-610 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.87 - 2.56:1 zoom HB 105-611 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
2.56 - 4.16:1 zoom HB 105-612 9.1m - 45m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
4.16 - 6.96:1 zoom HB 105-613 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
6.92 - 10.36:1 zoom HB 109-235 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised and programmable shift, zoom and focus. Intelligent Lens Memory.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      +/-10° from horizontal
Power Requirements 110 - 240VAC 50/60Hz single phase
At 110V the projector runs a maximum of two lamps.
Power Consumption 2300
Thermal Dissipation 7850
Fan Noise 55 dBA
Operating/Storage Temperature: Operating: 0 to 35C (32 to 95F)
Storage: -20 to 60C (-4 to 140F)
Operating Humidity 20% to 90% non-condensing
Weight 41 kg / 90 lbs
Dimensions L: 69.1 cm W: 51 cm H: 31 cm (excl. handle)
L: 27.2 in W: 20.1 in H: 12.2 in (excl. handle)
Safety & EMC Regulations CE, FCC Class A, UL, CCC
Accessories
Accessory Part No.
Lamp & Housing
4 Lamp & Housing incl. Filter Set
Infrared Remote (replacement)
Replacement Filter Set
Rigging Frame
116-378
118-586
117-780
116-847
117-705

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads
User Guide

User Guides

User Guides (German)

User Guides (French)

Important Information

Control Protocol