| Colour System: |
3-chip DLP® |
| Display Type: |
3 x 0.65" DarkChip™ DMD™
|
| DMD Specification: |
1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast. |
| Aspect Ratio: |
16x9 |
| Fill Factor |
87% |
| Key Features: |
Video & Graphics Processing
- HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
- Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
- Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.
- Synchronisation of active glasses or polarising switcher.
- High Bandwidth Digital & Analogue Receiver with 10 Bit A-D.
- 24p and 1080p native display.
- DynamicBlack™ for improved black levels in dark scenes.
- The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
- Image enhancement for MPEG, Mosquito noise & Colour Transients in composite sources.
|
| Source Compatibility |
HDMI including Deep Color™ processing and 3D standards.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or VGA.
Component Video (SD and HD) via YPrPb and RGB. |
| Inputs/Outputs |
| Video & Computer |
| Type |
Connector |
Qty |
HDMI 1.4
VGA / Analog RGB
Component Video
Component Video |
HDMI
15-pin D-Sub
3 x RCA
3 x BNC |
2
1
1
1 |
.
| Communication & Control |
| Type |
Connector |
Qty |
3D Sync Out
3D Sync In
LAN
RS232
IR Input
12V Trigger
Service Port |
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A |
1
1
1
1
1
2
1 |
|
| 3D Formats Supported |
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
|
| HDTV Formats Supported |
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz) |
| Computer Compatibility |
Up to 1920 x 1200 |
| Bandwidth |
200 MHz on analog RGB
165 Megapixels per second on HDMI |
| Remote Control |
IR Remote Control
On-Board keypad |
| Automation Control |
RS232
LAN |
| Colour Temperature |
User selectable from 5500 to 9300K |
| Operation |
 |
| illumination Type |
1 x 330W High Intensity Discharge |
| Typical illumination Life |
Full Power: 2000 hours |
| Lenses |
| Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
| 0.77 : 1 fixed HB |
110-808 |
1.3m - 15.0m |
Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame |
| 1.16 : 1 fixed HB |
110-809 |
1.4m - 25.0m |
Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame |
| 1.45 - 1.74 : 1 zoom HB |
110-803 |
1.8m - 9.3m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 1.74 - 2.17 : 1 zoom HB |
112-878 |
2.2m - 11.8m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 2.17 - 2.90 : 1 zoom HB |
113-852 |
2.7m - 15.4m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 2.90 - 4.34 : 1 zoom HB |
110-806 |
3.6m - 22.5m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 4.34 - 6.76 : 1 zoom HB |
110-807 |
5.5m - 35m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
| Lens Mount |
Motorised shift, zoom and focus. |
| Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet |
| Orientation |
Table Top or Inverted: Yes
Pointing Up: +/-8° from horizontal
Pointing Down: +/-8° from horizontal
Roll (Portrait): No |
| Power Requirements |
100-240VAC 50/60Hz single phase |
| Power Consumption |
480 |
| Thermal Dissipation |
1638 |
| Fan Noise |
35dBA, Eco 33dBA |
| Operating/Storage Temperature: |
Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F) |
| Operating Humidity |
20% to 90% non-condensing |
| Weight |
20 kg / 44.1 lbs |
| Dimensions |
L: 51.2 cm W: 49.9 cm H: 21.9 cm
L: 20.2 in W: 19.6 in H: 8.6 in |
| Safety & EMC Regulations |
CE, FCC Class A, UL, CCC |
| Accessories |
| Accessory |
Part No. |
HIGHlite 335 Lamp & Housing
Infrared Remote (replacement) |
111-100
115-758 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
| Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
|
| User Guide |
User Guides
Important Information
|