| Colour System: |
Six segment colour wheel (RGBRGB) |
| Display Type: |
1 x 0.64" TRP WQXGA DarkChip 3™ DMD™
|
| DMD Specification: |
2560 x 1600 native pixels |
| Aspect Ratio: |
16x10 |
| Fill Factor |
87% |
| Key Features: |
Video & Graphics Processing
- HDMI 2.0 with HDCP 2.2 (3D formats not supported).
- DisplayPort 1.2 with HDCP 2.2
- Low latency 1.5 frames
- Motion Blur Reduction
- 3G-SDI with loop-through.
- DICOM simulation mode.
Geometry Correction
- Selectable Aspect Ratios
- Digital Zoom, Pan and Scan
- Overscan
HDBaseT® Interface
- Supports uncompressed High Definition Video over standard CAT5e/6 LAN cable.
- Allows the projector to be placed up to 100m from the source with low cost cabling.
- Incorporates a 10/100 LAN control interface
Colour Processing
- Powerful seven point colour correction for accurate colour matching.
- Colour processing: 30-bits/Pixel
Projector Control Software
- Intuitive user interface for network control.
- Simultaneous control of user-defined groups of projectors.
- At-a-glance monitoring of projector status.
Projector Automation
- Real-Time clock provides daily on/off automation.
|
| Source Compatibility |
3G-SDI is SMPTE 292M-C, SMPTE 259M and SMPTE 424M compliant.
HDMI including Deep Color ™ Processing.
Graphics standards up to 2560x1600 resolution at 120Hz via HDMI or DisplayPort |
| Inputs/Outputs |
| Video & Computer |
| Type |
Connector |
Qty |
DisplayPort 1.2
HDMI 2.0
3G-SDI in
3G-SDI out
HDBaseT/LAN |
DisplayPort
HDMI
BNC
BNC
RJ45 |
1
2
1
1
1 |
.
| Communication & Control |
| Type |
Connector |
Qty |
LAN (Ethernet)
RS-232 Serial In
Wired Remote
12V Trigger |
RJ45
D-Sub 9-pin Female
3.5mm Stereo Jack
3.5mm Stereo Jack |
1
1
1
2 |
|
| 3D Formats Supported |
N/A |
| HDTV Formats Supported |
2560x1600 (100Hz, 120Hz) 2K 2048x1080 (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz, 100Hz, 120Hz) 1080i (50Hz, 60Hz) 1035i (60Hz) 720p (50Hz, 60Hz) |
| Computer Compatibility |
Low latency timings: 1080p@60Hz, 1600x1200@60Hz, 2560x1600@60Hz (≤1.5 frames) and 120Hz |
| Bandwidth |
18Gbps via HDMI 2.0
17.28 Gbit/s in High Bit Rate 2 (HBR2) mode |
| Remote Control |
Addressable IR remote control, wireless and wired.
On-Board keypad. |
| Automation Control |
Crestron RoomView® Connected
PJLink Class 1
LAN
RS-232
AMX (Device Discovery)
Served web pages: Projector Status, Control, Network setup, Alert Mail setup, Date/Time setup, Error log, Projector OSD functions |
| Colour Temperature |
3200 to 9300K |
| Operation |
 |
| illumination Type |
Laser Phosphor light source with Constant Brightness Control and Custom Laser power setting (35% - 100%). |
| Typical illumination Life |
20,000 hours |
| Lenses |
| Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
| 0.79 ~ 0.99:1 Zoom |
118-679 |
1.33m - 11.73m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1 (L) 0.2 (R) frame |
| 1.32 ~ 1.89:1 Zoom |
118-563 |
1.02m - 12.7m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1 (L) 0.2 (R) frame |
| 1.82 - 2.4:1 Zoom |
118-562 |
1.02m - 12.7m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1 (L) 0.2 (R) frame |
| 2.34 ~ 3.9:1 Zoom |
118-680 |
1.83m - 14.9m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1 (L) 0.2 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
| Lens Mount |
Motorised Shift, Zoom and Focus.(Lenses 0.67:1 & 1.12:1 have manual focus, shift is motorised)
Intelligent Lens Memory with 10 user-definable pre-set positions for zoom lenses. |
| Mechanical Mounting |
Front Table Top or Front Ceiling
Rear Table Top or Rear Ceiling
Adjustable Front/Rear feet |
| Orientation |
Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): Yes |
| Power Requirements |
100 ~ 130VAC & 200 ~ 240VAC selectable 50/60Hz single phase |
| Power Consumption |
Standby mode: SUPER ECO < 0.5W
Standby mode: ECO < 3 W
Standby mode: with Networking < 6 |
| Thermal Dissipation |
At 240V Normal mode = 2900 BTU/Hour
At 110V Normal mode = 3036 |
| Fan Noise |
Normal mode (Typical/Max) : 38dB/40dB (A) |
| Operating/Storage Temperature: |
Operating: 0° to 40°C (32° to 104°F)
Storage: -20° to 60C° (-4° to 140°F) |
| Operating Humidity |
0°C to 40°C (32° to 104°F) @ max 90% Humidity (non-condensing) |
| Weight |
22.7 kg / 60 lbs |
| Dimensions |
L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in |
| Safety & EMC Regulations |
UL / cUL, CB, CCC, FCC Class A, CE, FDA, CEL
GB 7247.1-2012 / IEC EN 60825-1 2007 Class 3R Laser Product
IEC EN 60825-1 2014 Class 1 Laser Product
IEC EN 62471-5 Risk Group 2 |
| Accessories |
| Accessory |
Part No. |
| Infrared Remote Control |
118-678 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
| Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
Lens CAD Drawings
|
| User Guide |
User Guides
Laser Risk Group Document
Important Information
|