Click to Print This Page

logo
logo

 

E-Vision Laser 5000 XGA

4,500 ANSI / 5,000 ISO Lumens | Contrast Ratio: 2,500:1 (Native) | Part Number: 118.569


Key Specifications:

Colour System: Laser Phosphor
Display Type: 1 x 0.55" DarkChip 33™ DLP3™ technology by Texas Instruments
DMD Specification: 1024 x 768 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 4:3
Fill Factor
Key Features:
Video & Graphics Processing
  • HDMI 1.4a for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
  • Synchronisation of active 3D glasses.
  • DICOM simulation mode.
  • Mobile High-Definition Link (MHL™) connection allows mirrored content from smartphones, tablets and other portable consumer electronics devices.
Geometry Correction
  • Vertical & Horizontal Keystone correction (2D: Vertical ±30°, Horizontal±30°).
  • Four Corner adjustment.
  • Selectable 16:9, 4:3, Native, Letterbox and Full Screen aspect ratios.
  • Digital Zoom +10~-10.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100m from the source with low cost cabling.
  • HDBaseT® includes audio, Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • 2 x speed, 3 Segment (GBY) Phosphor wheel.
  • 2 x 120Hz speed, 4 Segment (RGBY) Colour wheel.
  • 10-bit colour display.
  • 55% of NTSC colour gamut.
Source Compatibility Graphics standards up to 1920 x 1200 resolution at 60Hz.
Horizontal frequency 15, 31 ~ 102kHz.
Vertical frequency 24 ~ 30Hz, 47 ~ 120Hz.
Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 1.4a
HDMI 1.4a + MHL
VGA / Analog RGB
VGA / Monitor Out
Composite Video
HDBaseT
USB Type A / (5V/1.5A)
NOTE: The USB is to power WHDI™ interfaces.

Audio:
Audio IN L+R
Audio IN L+R
Mic IN
Audio OUT (variable)
Speakers
HDMI
HDMI
15-pin D-Sub
15-pin D-Sub
RCA
8P8C (RJ45)
USB Type A




Phono
3.5 mm jack
3.5 mm jack
3.5 mm jack
5W speaker
2
1
1
1
1
1
1




2
1
1
1
2
.
Communication & Control
Type Connector Qty
LAN
RS-232C
USB (for Service)
3D Sync Out

NOTE: The HDBaseT and LAN ports are not shared.
8P8C (RJ45)
9-pin D-sub
Mini B
VESA 3-PIN mini DIN
1
1
1
1
3D Formats Supported Frame Packing
HQFS \ Frame Sequential
Side By Side (half)
Top and Bottom
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA@60hz, Mac
Bandwidth
Remote Control IR remote control, 2 x IR receivers (front sensitivity up to 7m, rear sensitivity up to 10m)
Automation Control LAN control - Crestron RoomView® Connected
LAN control - Crestron eControl
LAN control - Extron
LAN control - AMX SSDP
LAN control to RS232 by Telnet
Concurrence Control for RS232/LAN
HDBaseT communication
Projector status email alerts
Colour Temperature Warm / Normal / Cold
Operation
illumination Type Laser Light Source
Typical illumination Life 20,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
1.51 - 2.5 :1 zoom N/A 1.5m - 5.0m Vert: Fixed Offset 0.575 (U) frame + small variable shift. See User manual. Hor: 0.05(L) 0.05 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Manual zoom and focus with horizontal and vertical shift.
Mechanical Mounting Front/Rear
Front/Rear Ceiling
Two adjustable front feet, 10° (43mm)
Ceiling Mount compatible chassis with 7 off M4 mounting holes available, maximum screw length 8mm (0.31")
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption Normal Mode (100%) 440W @230V 460W @110V
Eco Mode (80%) 340W @230V 360W @110V
Dimmy Mode (40%) 190W @230V 200W @110V
Standby, LAN enabled <2W @230V or 110V
Standby, LAN disabled <0.5W @230V or 110V
Thermal Dissipation Normal Mode (typical):
1570 BTU/Hour @ 110VAC
1501 BTU/Hour @ 230VAC
Fan Noise Normal Mode Typ: 36 dBA / Max: 38 dBA
Eco Mode Support Typ: 34 dBA / Max: 36 dBA
Eco Plus Mode Typ: 34 dBA / Max: 36 dBA
Dimmy Mode Typ: 29 dBA / Max: 31 dBA
Extreme Dimmy Mode Typ: 29 dBA / Max: 31 dBA
Operating/Storage Temperature: Operating: 0° to 40°C (32F to 104F)
Storage: -20° to 60°C (-4F to 140F)
Altitude: 2,500ft to 5,500ft at a maximum of 30°C (86F)
Altitude: 5,500ft to 10,000ft at a maximum of 25°C (77F)
Operating Humidity 10 to 85% non-condensing
Weight 10.7 kg / 23.6 lbs
Dimensions L: 45.0 cm W: 35.0 cm H: 15.1 cm
L: 17.7 in W: 13.8 in H: 5.9 in
Safety & EMC Regulations UL/cUL, CB, CCC/CECP, FCC Class B, FDA, CE
IEC 60825-1:2007 3R
IEC60825-1:2014 Class 1
IEC EN 62471-5 Risk Group 2
Accessories
Accessory Part No.
Infrared Remote (replacement)
117-880

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Lens CAD Drawings

User Guide

User Guides

Laser Risk Group Document

Important Information