Click to Print This Page

logo
logo

 

INSIGHT 4K 930 (Preliminary)

17,500 Lumens | Contrast Ratio: 2000:1 | Part Number: TBA


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 1.38" DarkChip™ DMD™
DMD Specification: 4096 x 2160 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 1.90:1
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
  • 3D Capable
  • Scaling of HDMI 1.4 formats to fill the 4K display
  • Dark Time insertion capability
  • HDMI 1.4b up to 3840 x 2160 at 30 fps.
  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
  • Synchronisation of active glasses or polarising switcher.
Color adjustments
  • Up to 12 bits per color processing (depending on source and input type).
  • Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.
  • Individual R, G & B lift and gain.
  • Black and White level adjustment via Brightness & Contrast control.
  • Degamma selection from a list of parametric curves.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User selection and storage of primary and secondary user defined color targets up to 7 points.
3D Functionality
  • Full 4K 3D display capability
  • Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.
  • Synchronisation of active glasses or polarising switcher.
  • Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses and polarizers.
Projector Control
  • Keypad.
  • Wired remote control.
  • Network control via RJ45 and protocol.
  • Group Controller Application
Source Compatibility Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI.
Inputs/Outputs
Video & Computer
Type Connector Qty
DisplayPort 1.2
HDMI 1.4
DisplayPort
HDMI
2
2
.
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Infra-Red
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
Front and Rear IR Receivers
1
1
1
1
1
2
3D Formats Supported Dual Pipe (Q3 2016)
Frame Sequential
HDTV Formats Supported 4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
1080p (24, 25, 30, 50, 59.94, 60 Hz)
Computer Compatibility Up to 4096 x 2160
Bandwidth N/A
Remote Control Wired remote control
On-Board keypad
Automation Control RS232
LAN
Colour Temperature Adjustable
Operation
illumination Type 2 x 465W High Intensity Discharge
Typical illumination Life Full Power: 1500 hours (up to 6000 hours in lamp sequential mode) Eco Mode : 2000 hours (up to 8000 hours in lamp sequential mode)
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
At Native 4K - - -
0.93:1 fixed 117-310 0.5m - 100m Vert: 0.21 (U) 0.21 (D) frame, Hor: 0.08 (L) 0.08 (R)
1.13 - 1.72:1 115-627 2.5m - 100m Vert: 0.34 (U) 0.19 (D) frame, Hor: 0.08 (L) 0.10 (R) frame
1.65 - 2.60:1 115-630 3.5m - 100m Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
2.53 - 4.98:1 115-632 4.5m - 100m Vert: 0.37 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
At UHD - - -
0.99:1 fixed 117-310 0.5m - 100m Vert: 0.27 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.11 (R)
1.21 - 1.83:1 115-627 2.5m - 100m Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.14 (R) frame
1.76 - 2.77:1 115-630 3.5m - 100m Vert: 0.45 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame
2.70 - 5.31:1 115-632 4.5m - 100m Vert: 0.42 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   No
Roll (Portrait):      No
Power Requirements 200-240VAC 50/60Hz single phase
Power Consumption 2100W
Thermal Dissipation 7165 BTU/Hour
Fan Noise 48 dBA
Operating/Storage Temperature: Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)
Operating Humidity 20 to 80% non-condensing
Dimensions H: 32.5 cm W: 70.0 cm L: 82.0 cm
H: 12.8 in W: 27.56 in L: 32.3 in
Safety & EMC Regulations CE, FCC Class A
Accessories
Accessory Part No.
RapidRig™ Frame
Replacement Filter Set
Lens Adapter Kit for 0.72:1 4K Schneider Lens
116-064
117-751
117-343

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads
User Guide