Click to Print This Page

logo
logo

 

INSIGHT 4K Dual LED

3,000* Lumens | Contrast Ratio: 2,500:1 | Part Number: 116-695


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 1.38" DarkChip™ DMD™
DMD Specification: 4096 x 2160 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 1.90:1
Fill Factor 87%
Key Features:
*Takes into account Helmholtz-Kohlrausch effect. LED illuminated projectors produce extraordinarily high colour purity and saturation, thus appearing brighter than a lamp-based display with similar measured lumen specifications.
Video & Graphics Processing
  • Up to 60fps 4096 x 2160 pixels sequential input via single cable (DisplayPort 1.2).
  • 3D capable (see 3D Functionality below).
  • Scaling of 2K formats to fill the 4K display.
  • Dark Time insertion capability.
  • HDMI 1.4b up to 3840 x 2160 at 30 fps.
Color adjustments
  • Up to 12 bits per color processing (depending on source and input type).
  • Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.
  • Individual R, G & B lift and gain.
  • Black and White level adjustment via Brightness & Contrast control.
  • Degamma selection from a list of parametric curves.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User selection and storage of user defined color targets.
3D Functionality
  • Full 4K, sequential input, 3D display capability.
  • Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.
  • Synchronisation of active glasses or polarising switcher.
  • Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses and polarizers.
  • Dual and Triple Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
  • Synchronisation of active glasses or polarising switcher.
Projector Control
  • Keypad.
  • Infra-red and wired remote control.
  • Network control via RJ45 and protocol.
  • Serial control via RS232 and protocol.
  • Group Controller application.
Source Compatibility Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI.
Inputs/Outputs
Video & Computer
Type Connector Qty
DisplayPort 1.2
HDMI 1.4
DisplayPort
HDMI
2
2
.
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Infra-Red
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
Front and Rear IR Receivers
1
1
1
1
1
2
3D Formats Supported Frame Sequential
HDTV Formats Supported 4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
1080p (24, 25, 30, 50, 59.94, 60 Hz)
Computer Compatibility Up to 4096 x 2160
Bandwidth N/A
Remote Control On-board keypad
Wired remote control
Infra-red remote control
Automation Control RS232
LAN
Colour Temperature User selectable from 3300 to 10000K
Operation
illumination Type LED
Typical illumination Life 60,000 hours (80% lumen maintenance to 50,000 hours)
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
At Native 4K - - -
0.93:1 fixed 117-310 0.5m - 100m Vert: 0.21 (U) 0.21 (D) frame, Hor: 0.08 (L) 0.08 (R)
1.13 - 1.72:1 115-627 2.5m - 100m Vert: 0.34 (U) 0.19 (D) frame, Hor: 0.08 (L) 0.10 (R) frame
1.65 - 2.60:1 115-630 3.5m - 100m Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
2.53 - 4.98:1 115-632 4.5m - 100m Vert: 0.37 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
At UHD - - -
0.99:1 fixed 117-310 0.5m - 100m Vert: 0.27 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.11 (R)
1.21 - 1.83:1 115-627 2.5m - 100m Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.14 (R) frame
1.76 - 2.77:1 115-630 3.5m - 100m Vert: 0.45 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame
2.70 - 5.31:1 115-632 4.5m - 100m Vert: 0.42 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100 - 240VAC 50/60Hz single phase
Power Consumption 900
Thermal Dissipation 3070
Fan Noise 40 dBA
Operating/Storage Temperature: Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)
Operating Humidity 20 to 80% non-condensing
Weight 67 kg / 148 lbs
Dimensions H: 32.5 cm W: 70.0 cm L: 93.5 cm
H: 12.8 in W: 27.56 in L: 36.8 inH: 32.5 cm W: 70.0 cm L: 82.0 cm
H: 12.8 in W: 27.56 in L: 32.3 in
Safety & EMC Regulations CE, FCC Class A
Accessories
Accessory Part No.
RapidRig™ Frame
Replacement Filter Set
Lens Adapter Kit for 0.72:1 4K Schneider Lens
116-064
115-761
117-343

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

Lens CAD Drawings

User Guide

User Guides

User Guides (German)

User Guides (French)

Important Information

Control Protocol

0.72:1 Schneider Lens Assembly Guide